Cake Lime & - Electric Bike - Street Legal

CAKE STANDS FOR - NO COMPROMISE

 

INTRODUCING:  Kalk the electric motorcycle series, produced by CAKE.

CAKE is a Swedish company that grew out of a passion for high-quality performance products.

The Kalk & (and), the street-legal version of the off-road version Kalk OR, looks similar on the outside, but has some innovations. Heavily influenced by downhill and enduro bikes, both in terms of feel and handling, the design takes both sports into account when it comes to geometry, suspension and component selection. The gearbox differs slightly, however, and the top speed has been increased to over 90 km / h in order to make it possible to drive on country roads.

 

 

Cake Electric Bike eBike

 

Every component of the Kalk & had to be developed from scratch because mountain bike parts are too weak and motorcycle parts are too heavy. Every part of the Kalk & including the chassis, special Öhlins suspensions, wheels, tires and drivetrain were designed and manufactured for optimal performance. 

With a weight of 79 kg including battery, the 10 kW drive accelerates continuously to over 90 km / h. The torque on the rear wheel is 252 Nm. Depending on the driving style and terrain, the driving fun lasts between 35 km to over 80 km or 3 hours. The charging time at a normal household socket for 100% is 2.5 hours.

 

 

Cake Electric bike eBike

 

The name Kalk derives directly from the limestone floor on the Swedish island of Gotland, on which the CAKE test site is located. Adding the & (and) means the next phase in the development of the lime. The Kalk & was developed for both the outback and daily commuting and offers every driver the best of both worlds.

 

Cake Electric bike

 

  

This amazing bike is available from Bad & Bold You can obtain more info and order directly from the suppliers site here.

Delivery times 8 to 12 weeks

 Cake Electric bike

 

Made in TAIWAN
Sizes & fit WEIGHT
DRY 62KG + BATTERY 17KG

SPEED ​​& RANGE
TOP SPEED: + 90KM / H / + 56MPH
RANGE - TRAIL / ENDURO: 3 HOURS
RANGE - MIXED CITY RIDING (WMTC-II): 86 KM / 53 MILES
RANGE - HIGH SPEED RIDING (@ 70 KM / H / 44 MPH): 35 KM / 22 MILES
THE ACTUAL RANGE DEPENDS ON A NUMBER OF DIFFERENT ASPECTS, EG RIDING STYLE, RIDER WEIGHT, WEATHER CONDITIONS, TEMPERATURE, ROAD SURFACE AND TIRE PRESSURE.

DRIVETRAIN
POWER: 10KW MOTOR
TORQUE: 42NM ON SHAFT / 252NM ON WHEEL


FRONT SPROCKET: 12 TEETH, RUBBER INFUSED
REAR SPROCKET: 72 TEETH
CHAIN: 420 O-RING


BATTERY
18650 LITHIUM ION CELLS
51.8 VOLTS, 50 AH, 2.6 KWH

CHARGING 0-100% TAKES 2.5 H TO CHARGE IN A STANDARD OUTLET

3 RIDING MODES:
EXPLORE: THE ULTIMATE MODE DURING EXPLORATION. LIMITED SPEED TO 45 KM / H AND 3-4H + BATTERY RANGE
EXCITE: ENDURO OR ACTIVE TRAIL RIDING. 1-2 H RIDING TIME
EXCEL: TRACK AND RACE MODE, MAXIMUM TORQUE AND SPEED, RIDING TIME UP TO 1H


3 BRAKE MODES: FREE WHEEL, 2-STROKE LIKE, 4-STROKE LIKE, MAXIMUM REGENERATION OF ELECTRICITY TO BATTERY

DISPLAY SPEEDOMETER, TRIP METER AND ODOMETER, BATTERY STATUS AND POWER USAGE

FRAME 6061 ALUMINUM, EXTRUDED, FORGED, MACHINED AND PAINTED

SUSPENSION - FORKS: THE UPSIDE DOWN FORK IS AIR / OIL SPRUNG AND FEATURES 38MM STANCHION TUBES FOR EXTRA RIGIDITY AND STRENGTH, WITH 204MM TRAVEL, SPECIALLY DEVELOPED BY ÖHLINS. ADJUSTABLE FOR HIGH-SPEED COMPRESSION, LOW-SPEED COMPRESSION AND LOW-SPEED REBOUND. THE FORKS ARE EQUIPPED WITH ÖHLINS ADVANCED 3 STAGE AIR SPRINGS WITH INDIVIDUAL SETUP FOR RIDE HEIGHTS AND BOTTOMING RESISTANCE.

REAR SUSPENSION 205 MM. ÖHLINS TTX22 WITH CAKE INTERNALS AND SPECIFIC SPRING. DESIGNED WITH LINKAGE FOR BEST PERFORMANCE.

HEAD ANGLE / FORK ANGLE 65 DEGREES

WHEEL BASE 1,310 MM
SEAT HEIGHT 910 MM (UNLOADED)
GROUND CLEARANCE 300 MM

TRAIL AND OFFSET
87.4 MM OF TRAIL
22 MM OFFSET IN TRIPLE CLAMPS
36 MM OFFSET IN FORKS

BRAKES
MOTORCYCLE STANDARD, FOUR PISTONS CALIPERS AND 220 MM / 3.2 MM STAINLESS STEEL DISCS
HAND LEVER FRONT, FOOT PEDAL REAR

LIGHTING LED HEADLIGHT, LED TURN SIGNAL LIGHTS AND LED TAILLIGHT. EASILY REMOVABLE LIGHT SYSTEM FOR OFF-ROAD RIDING.

HANDLEBAR AEROSPACE GRADE 7050 ALUMINUM, 800 MM WIDE, 20 MM RISE, 31.8 MM

STEM AEROSPACE GRADE 7075 ALUMINUM

WHEELS AND TIRES ENLARGED 25 MM FRONT AXLE
ALUMINUM 6061 FORGED AND CNC MACHINED HUBS
19 × 1.85 ”7116-T6 ALUMINUM MOTORCYCLE RIMS
19 × 3.00” DUAL SPORT MOTORCYCLE TIRES

CLASS (VALID FOR EU): L3E-A1E, LICENSE REQUIREMENT: A1

* NOTE THAT ALL DETAILS ARE SUBJECT TO CHANGES
Material FENDERS AND BODYWORK: ALL FENDERS AND BODYWORK ARE MADE OF PAINTED POLYCARBONATE
BEARINGS: ALL BEARINGS THROUGHOUT THE BIKE ARE SKF’S
Wash & care WHEN PLACING AN ORDER, A DEPOSIT OF 200 EUROS IS DUE, THE REST UPON DELIVERY. OF COURSE, OUR 14-DAY RIGHT OF RETURN DOES NOT APPLY HERE. THE STATUTORY RIGHT OF WITHDRAWAL BEFORE DELIVERY AND THE NORMAL WARRANTY APPLY.

 

 

Cake Electric bike

 

 

Cake electric bike